3D-printed airframe

INFINIX 3D-Printed Fixed-Wing UAV

In developmentDetails to be confirmedName to be confirmed

A fully 3D-printed twin-boom pusher fixed-wing UAV, flown with the AARYA flight controller, with a 1 m wingspan, hand launch and a front payload bay of up to 800 g.

Enquire about this platform View specifications
3D-printed twin-boom fixed-wing UAV displayed on a purple cloth-covered table at an exhibition

At a glance

Key specifications.

Wingspan
1,000 mmStatus: Listed.
MTOW
2.80 kgStatus: Listed.
Typical endurance
60+ minStatus: Listed.
Launch
Hand-launchStatus: Listed.
  • Status: Tested. Verified in INFINIX testing, as stated in the datasheet.
  • Status: Estimated. Estimated or projected. Not yet verified.
  • Status: Listed. Stated in the INFINIX datasheet. Not independently verified.
  • Status: To be confirmed. To be confirmed with INFINIX INC.

Datasheet

Full specifications.

Airframe

INFINIX 3D-Printed Fixed-Wing UAV: Airframe
SpecificationValueStatus
ConfigurationTwin-boom pusherStatus: Listed.
ConstructionFully 3D-printed HS-plastic airframeStatus: Listed.
Wingspan1,000 mmStatus: Listed.
Wing area1,955 cm²Status: Listed.
Fuselage length~855 mmStatus: Listed.
CG tolerance±5 mm from centreStatus: Listed.
AirfoilSelig S7055 (high-lift, low-Reynolds)Status: Listed.

Weight & payload

INFINIX 3D-Printed Fixed-Wing UAV: Weight & payload
SpecificationValueStatus
Empty weight~900 gStatus: Listed.
MTOW2.80 kgStatus: Listed.
Payload capacityUp to 800 gStatus: Listed.
Battery bay145 × 50 × 45 mmStatus: Listed.
Battery6S Li-ion (e.g. Molicel 6S2P)Status: Listed.

Power system

INFINIX 3D-Printed Fixed-Wing UAV: Power system
SpecificationValueStatus
MotorsDual 2207–2450 kV brushlessStatus: Listed.
ESCsDual 35 A or higherStatus: Listed.
Propellers6×4.5 to 8×5 (CW and CCW)Status: Listed.
Cruise power (at 2.25 kg)~114 WStatus: Estimated.
Cruise current~4.3 A (6S)Status: Estimated.
Typical endurance60+ minutesStatus: Listed.
Cruise speed60–120 km/hStatus: Listed.

Avionics & performance

INFINIX 3D-Printed Fixed-Wing UAV: Avionics & performance
SpecificationValueStatus
Flight controllerAARYAStatus: Listed.
Servos4× 9 gStatus: Listed.
Telemetry915 MHz, 2.4 GHz and SatcomStatus: Listed.
FPVDigital and analogStatus: Listed.
GPS mountRear vertical mastStatus: Listed.
LaunchHand-launchStatus: Listed.
Stall speed35 km/hStatus: Listed.

Anatomy

Parts & functions.

Part 01 / 08

Wing

Selig S7055 high-lift, low-Reynolds airfoil.

Wing specifications
SpecificationValueStatus
Wingspan1,000 mmStatus: Listed.

Part 02 / 08

Fuselage

3D-printed central pod holding the battery bay and avionics.

Part 03 / 08

Twin booms

Carry the tail surfaces in a twin-boom pusher layout.

Part 04 / 08

Dual motors

Dual 2207–2450 kV brushless motors in a pusher configuration.

Dual motors specifications
SpecificationValueStatus
Motors2207–2450 kV ×2Status: Listed.

Part 05 / 08

Battery bay

145 × 50 × 45 mm bay for a 6S Li-ion pack.

Part 07 / 08

GPS mast

Rear vertical mast carrying the GPS module.

Part 08 / 08

Front payload bay

Generic front compartment, up to 800 g.

Front payload bay specifications
SpecificationValueStatus
CapacityUp to 800 gStatus: Listed.

Interested in INFINIX 3D-Printed Fixed-Wing UAV?

Talk to INFINIX INC about configuration, availability and current test status.

Enquire now

Product information on this website is based on supplied project documents and may describe prototypes, development configurations, or estimated performance. Confirm current specifications, test status, regulatory approvals, and availability directly with INFINIX INC.